Instructions for use:
Use to rejuvenate dry wood.
To achieve a good finish, be sure that wood is dry and free
of contaminants such as grease and wax, or anything which will
act as a barrier to the wood substrate. If necessary to meet
your requirements, lightly sand with a good quality sandpaper.
Apply liberally with a clean dry rag or brush. Let stand several
minutes. Wipe off all excess. Do not allow to puddle.
Classic Teak Oil can be buffed to a satiny sheen after a few
hours. On new wood, two or three coats will be necessary. Stop
applications once surface is saturated and oil stops seeping
into wood surface.
Clean brushes with mineral spirits.
|